Hibernate: Difference between revisions

From SlackWiki
Jump to navigation Jump to search
No edit summary
(major rewrite + hibernating from console)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
In Slackware, hibernation works out-of-the-box and can be easily done from KDE's menu. Resuming from hibernation, however, is not set up, so when you turn on your computer again, it starts as normal. That is, if your hardware supports it and if you've set up a swap space larger than your RAM.
In Slackware, hibernation works out-of-the-box and can be easily done from KDE's menu or XFCE logout dialog. Resuming from hibernation, however, is not set up, so when you turn on your computer again, it starts as normal. That is, if your hardware supports it and if you've set up a swap space larger than your RAM.


== Huge kernel ==
== Hibernating in lightweight windows managers ==
 
In case you aren't using KDE, XFCE or other desktop environments, you can hibernate your system from console. 
 
=== pm-utils ===
 
As root, you can hibernate via <tt>pm-hibernate</tt> command.
 
=== As regular user ===
 
==== HAL ====
 
Since HAL is deprecated and removed from Slackware 14.0, this works for older Slackware releases.
 
$ dbus-send --system --print-reply --dest="org.freedesktop.Hal" \
/org/freedesktop/Hal/devices/computer org.freedesktop.Hal.Device.SystemPowerManagement.Hibernate
 
==== UPower ====
dbus-send --system --print-reply --dest="org.freedesktop.UPower" \
/org/freedesktop/UPower org.freedesktop.UPower.Hibernate
 
== Booloader configuration ==
 
=== Non-LVM setup ===
 
==== LILO configuration ====


To tell your kernel where to resume from, you need to write the info to ''lilo.conf'':
To tell your kernel where to resume from, you need to write the info to ''lilo.conf'':
Line 9: Line 34:
Replace ''/dev/sda6'' with your actual swap space. Swap partitions are perfect, I think swap files should work too. If you don't know where your swap lies, look at ''/proc/swaps''.
Replace ''/dev/sda6'' with your actual swap space. Swap partitions are perfect, I think swap files should work too. If you don't know where your swap lies, look at ''/proc/swaps''.


== Generic kernel + initrd ==
=== LVM setup ===
 
If you're using generic or your own kernel, you need to adjust initrd image as well. Append
 
  -h /dev/sdx


to mkinitrd command so it may look like this:
LILO doesn't support booting from LVM, therefore you have to create initial ramdisk (initrd). You need one even though your kernel has build-in support for LVM.
  mkinitrd -c -k 2.6.33.4 -f <fs_type> -m <fs_type> -r /dev/sdx -h /dev/sdy


Replace ''/dev/sdx'' with your actual root partition and ''/dev/sdy'' with your actual swap space.
You don't have to adjust ''lilo.conf'' because you can set everything resume-related in initrd.


If you're using LVM, don't forget to append '''-L''' to mkinitrd command
mkinitrd -c -k <kernel-version> -f <fs_type> -m <fs_type> -r <root_partition> -h /dev/volumegroup/swap -L


  mkinitrd -c -k 2.6.33.4 -f <fs_type> -m <fs_type> -r /dev/sdx -h /dev/volumegroup/swap -L
* -h set your hibernation/swap logical volume
* -L activate LVM


Afterwards, run lilo.
Afterwards, run lilo.
Line 29: Line 49:
== Further reading ==
== Further reading ==


* [http://www.linuxquestions.org/linux/answers/Hardware/Mini_HOW_TO_Hibernate_and_resume_0 Mini_HOW_TO_Hibernate_and_resume_0]
* Hibernate to encrypted swap - [http://slackware.osuosl.org/slackware-13.1/README_CRYPT.TXT REAME_CRYPT.TXT]
* Hibernate to encrypted swap - [http://slackware.osuosl.org/slackware-13.1/README_CRYPT.TXT REAME_CRYPT.TXT]


[[Category:Tutorials]]
[[Category:Tutorials]]

Latest revision as of 21:47, 17 August 2012

In Slackware, hibernation works out-of-the-box and can be easily done from KDE's menu or XFCE logout dialog. Resuming from hibernation, however, is not set up, so when you turn on your computer again, it starts as normal. That is, if your hardware supports it and if you've set up a swap space larger than your RAM.

Hibernating in lightweight windows managers

In case you aren't using KDE, XFCE or other desktop environments, you can hibernate your system from console.

pm-utils

As root, you can hibernate via pm-hibernate command.

As regular user

HAL

Since HAL is deprecated and removed from Slackware 14.0, this works for older Slackware releases.

$ dbus-send --system --print-reply --dest="org.freedesktop.Hal" \
/org/freedesktop/Hal/devices/computer org.freedesktop.Hal.Device.SystemPowerManagement.Hibernate

UPower

dbus-send --system --print-reply --dest="org.freedesktop.UPower" \
/org/freedesktop/UPower org.freedesktop.UPower.Hibernate

Booloader configuration

Non-LVM setup

LILO configuration

To tell your kernel where to resume from, you need to write the info to lilo.conf:

append=" resume=/dev/sda6"

Replace /dev/sda6 with your actual swap space. Swap partitions are perfect, I think swap files should work too. If you don't know where your swap lies, look at /proc/swaps.

LVM setup

LILO doesn't support booting from LVM, therefore you have to create initial ramdisk (initrd). You need one even though your kernel has build-in support for LVM.

You don't have to adjust lilo.conf because you can set everything resume-related in initrd.

mkinitrd -c -k <kernel-version> -f <fs_type> -m <fs_type> -r <root_partition> -h /dev/volumegroup/swap -L
  • -h set your hibernation/swap logical volume
  • -L activate LVM

Afterwards, run lilo.

Further reading